Tecco mesh is made of high strength steel wire with diameters of 2,
3 or 4 mm. It can be used to stabilize almost any slope, whether
rock or soil, quick & easy to install,for easy handling and
TECHNICAL DATA SHEET:
1. Material:high tensile steel wire
2. Wire diameter:3.0mm,4.0mm
3. High tensile strength 1770Mpa
4. Mesh size:83mm x 143mm(Inscribed circle diameter 65mm )
5. Mesh shape:Rhomboid
6.Corrosion protection:super coating
8.Breaking load of single wire:12.5KN
Tecco wire mesh system Components
Main Components: High-tensile steel wire mesh,Steel bar anchor or
bolting, Claw type special anchor plate, Edge rope, oversewed rope
or special lock.
The TECCO system consists of four main components that are
carefully coordinated with each other:
1. TECCO steel wire mesh
TECCO mesh is made of high-tensile steel wire with an ultimate
tensile strength of 1770 N/mm2.
2. TECCO spike plates
Rigid spike plates that are reinforced with ribbing ensure optimal
load transmission from soil or rock anchors to the TECCO mesh.These
plates are placed over the anchor heads and tightened to
pre-tension the mesh onto the slope.The plates are galvanized and
have dimensions of 13.0''*7.5"*0.4"(330mm*190mm*10mm).
3. TECCO connection clips
The connection clips high-strength steel wire connection clips
enable mesh sections to be joined without overlapping and still
guarantee one hundred percent transfer of forces.These claw are hot
dip galvanized and consist of 0.25"(6mm) thick steel spiral.
4. Soil or rock nails
Adapted to the local soil and rock static requirements, the TECCO
mesh can be anchored in accordance with our dimensioning concept
with commercial soil or rock nails.The main anchors of the system
are installed in a grid typically from 6.6 to 16.4 ft (2.0 to
5.0m)horizontal and vertical spacing.Actual spacing depends upon
the results of site analysis and modeling.Anchor consist of
commercially available steel bars ranging from 1.0 to 1.25 ft (25
to 32mm).Selfdrilling grout injection anchors are also
permitted.Additional anchors may also be used to provide added
support at boundaries and in low points and hollows.
The tecco mesh is often installed on the soil or rock texture
surface, such as mountain, slope to ensure the plant growth.
Besides, it also can be used to control water, soil loss and
external-soil spray seeding.